Before you decide to install or replace garage door springs, you should be aware of few important things. These springs are under a high amount of pressure. They are used to balance the weight of the garage door while opening and closing. If they snap, there is a chance; they can cause several injuries that can be quite serious. The best action to take, especially if you are not experienced at this type of fixing work is to call the best garage door repair service in Greenwich, Connecticut. They are specially qualified, trained, and equipped with tools that are required to change the springs.
Garage door springs are wounded on both sides of the garage door or over the top of the garage door. Even if you are facing problems with one of them, changing both of them is recommended. If one creak, the other will likely follow it shortly. Garage door springs are normally good for approximately 10,000 operating cycles before they need to be changed. An older version of springs is the extension and looped. A newer model of garage door springs is the “torsion springs system” which is used on overhead garage doors.
Garage door springs that are required are not going to be easy to find for an ordinary person who is not engaged in this industry. This is another common problem that the unskilled individual will not attempt the garage door spring repair and replacement task. If you are able to get one, you will likely pay far more for it because companies do not allow you to sell these products to end-user. They are strictly advised to sell these items to the authorized dealers and retailers only in order to prevent these problems.
If you are determined to conduct a garage door spring replacement and fine the new spring yourself, you will probably be in for extensive research. Finding the right type and size of the product is not going to be easy. The measurement of the new springs must be exact as there are several types and sizes of torsion springs under each category. You should carefully take the measurement of old and new springs. The length and size of the wire and the inside diameter of the springs will be included in the exact measurements.
If your garage door is using torsion springs, there may be two placed on each side of a garage door. The measurement of spring cannot be off even by a little inch because each one is particularly designed according to the weight and type of garage door on which they are used. Don’t forget to determine the amount of tension that is required when the garage door goes up and down.
In addition to this, when you have decided to replace the springs on your own, and if something goes wrong or the garage door does not function properly, you must restart all over again. It can be hectic and costly work. When you use professional services for this project, the work should be guaranteed. It is one of the factors that you will want to make sure of before hiring a professional garage door technician.
The products they use are guaranteed as well. It means if something goes wrong in a few days and your garage door is not functioning properly, they will come back and fix the issues without charging you. Therefore, the cost that is incurred when must be replaced is probably going to be less if you hire a garage door repair company that specializes in the garage door business.