Garage Door Service – Points to Stress Upon

Homeowners often underestimate the importance of routine garage door maintenance service. As a responsible homeowner, you need to inspect and service the garage door periodically, just like you need to service your car for its long and functional life. In this article, I will explain different phases of garage door service that you should stress upon. If you are in need of garage door repair and maintenance service, visit the link at

Garage door repair: Before performing any fixing task, it is good to understand how the garage door operates and its operating mechanism works. Overhead automatic garage door either rolls up in multiple sections or swing up in a single piece. In this system, there is a long torsion spring that is mounted at the center of the garage door opening. The garage door runs on metal tracks that are placed on the walls of the garage. Mostly garage door service is needed to fix the metal tracks or replace the broken torsion springs.

  • Inspect the metal tracks and have a look at the mounting brackets. In the garage door service process, you might need to tighten the loose screws, bolts, and nuts that secure the brackets to the walls. These tracks need to be checked to find out crimps, dents, or flat spots. If you experience any spot, they can be fixed using a rubber mallet or plastic hammer. If the tracks are badly damaged beyond repair they need to be replaced.
  • In the second step of garage door service, you need to make sure whether the metal tracks are properly aligned. In fact, horizontal tracks should slant slightly down forward. Their position should be adjusted towards the back of the garage. In the roll-up garage doors, the vertical tracks should be perpendicular. In case, the tracks are not balanced, you just lose the hardware that holds the mounting brackets. Tap the tracks gently in order to align them.

  • Next, you need to clean the tracks using any mild household cleaner to remove the dust, dirt, or any accumulated grease. Don’t forget to clean the rollers properly. After washing the garage door and rollers, wipe them using a cotton cloth to make them dry. Avoid using harsh chemicals on the garage door. Afterward, you need to lubricate the tracks and rollers. You can use any silicone spray or powdered graphite for this purpose.
  • Garage door service also involves the maintenance of hardware. If you find any loose parts, you should tighten them properly. In the case of a swing-up garage door, you need to make sure that springs are mounted properly. If not, shift the springs to the next notch. You should check the hinges and tighten them securely.
  • In the last step of garage door service, you need to inspect the garage door torsion springs. If you experienced that springs are loose then you need to shift the hooks of springs to the next notch or hole in order to adjust the tension. In the case of roller sectional garage doors, you might need to adjust the tension of torsion springs by just pulling the cable through the plates of springs.